Home > SUBWAY GLASS TILE >

  EC32
  Subway Glass Tile - EC32
Subway Glass Tile - EC32

Bookmark and Share
 
Alternative Views:
List Price: $22.99
Our Price: $12.99
You save $10.00!



Product Code: EC32

Description Installation Tips Return Policy
 
  • Setting Materials
  • Laticrete 254 Platinum Multipurpose Thinset Mortar, or, Mapei Kerabond Premium Dry set Mortar mixed with Keralastic Mortar Admix. Any of these choices are more than adequate for the job and will ensure a proper bonding of your material. For wet area installation, we recommend using Laticrete Epoxy adhesive.
  • While many installers will use Mastic when installing glass tile, we do not recommend this when installing glass tile due to the potential for yellowing of the material over time and more importantly, the lower bond strength than that offered by the setting materials profiled above.
  • Anti-Fracture/Waterproofing Membranes
  • Use of an anti-fracture membrane is strongly recommended in most glass tile installations. Many substrates may continue to cure over a period of months and an anti fracture membrane prevents shrinkage or movement of the substrate to mirror through the tile. Saying this, be sure to install only over well cured, stable substrates.
  • Grout
  • In general, when grouting Glass mosaic tile, Non Sanded grout can be used and is more suitable for glass mosaic tile due to the small grout joints that are normal with this tile. When installing Glass Field tile, Sanded grout would probably be the preferred choice due to the potential for larger grout joints in your installation. For wet area installation, we recommend using Laticrete Spectralock Epoxy grout.
  • When setting glass mosaics a 3/16” x ¼ V-Notch trowel is recommended, while a ¼” x ¼” square notch trowel is preferred for installing glass field tile. Spread as much adhesive with a notched trowel in an area no larger than what can be covered within 15 minutes. Using the flat side of the trowel flatten the notches to achieve a smooth consistent setting bed approximately 1/8” thick for mosaics and 3/16” thick for field tile.
  • Cutting your Glass Tile
  • Hand glass cutting tools or wet saw with a diamond “cut-off” blade. Edges can be sanded smooth after cutting
  • Grouting your Glass Tile
  • Finish your project by using a rubber grout float to grout your almost completed installation. Push the grout in to the joints at a level following the manufacturer’s recommendations. Clean the grouted material by wiping with a damp tile sponge and removing any excess grout haze with a dry cheesecloth. Allow the grout to cure for a period of 48 hours before removing any final grout haze with a clean and dry soft cloth. When using Epoxy grout, please follow manufacturer's installation instruction.


Average Customer Review: Based on 1 reviewsWrite a review.

  10 of 10 people found the following review helpful:
 
Nice kitchen backsplash May 21, 2010
Reviewer: Mary Jane from Pendleton, WA  
I bought many different samples from a few online stores.  It was very difficult to choose among all of them.  My daughter helped me pick this out and what a great decision she made.  This color goes very well with my mahogany cabinet.  Price was the best compare to others.  Free shipping and FAST.  I was surprised I received the tracking number within 30 mins after I ordered.  It was promptly shipped and arrived double box.

Was this review helpful to you?


Browse for more products in the same category as this item:

SUBWAY GLASS TILE
NEW GLASS TILE